Turmeric Clay Face Mask Project
Turmeric is a plant of the ginger family, and it's usually used in dry powder form. Its commonly added to dishes like curry and has been used in Chinese medicine for years. This Turmeric Clay Face Mask recipe harnesses the properties of this powerful spice, along with luxurious skincare ingredients like carrot seed essential oil and carrot extract.
This clay mask was specifically designed for normal to oily skin. It contains kaolin clay, which is fine-grained and gentle on the skin. Carrot extract is high in vitamins A and E, and it's thought to soothe the skin. Carrot seed essential oil is rich in vitamins and carotene. It has a distinct herby smell that’s not everybody’s favorite, but this recipe uses a small amount so it’s not overwhelming.
This mask washes off cleanly with no staining. Turmeric powder can stain your work surface though, so we recommend laying down newspaper or cardboard before you get started on this mask.
Want more skincare making supplies? Check out our skincare kits.
What You Need:
BTMS - 50 Conditioning Emulsifier - 2 oz
Polawax Emulsifying Wax - 1 lb
Optiphen - 1 oz
Avocado Oil - 1 lb
Kaolin Clay - 2 lbs
Carrot Extract - 1 oz
Turmeric Powder - 3 oz
Turmeric Clay Mask Digital Label
DISCONTINUED - Waterproof Labels - 1 label
Droppers With Suction Bulb - 1 dropper
Short 8 oz Plastic Bail Jar - 10 jars
Orange 10X Essential Oil - 1.5 oz
Recipe
INGREDIENTS:
- BTMS - 50 Conditioning Emulsifier - 2 oz
- Polawax Emulsifying Wax - 1 lb
- Optiphen - 1 oz
- Avocado Oil - 1 lb
- Kaolin Clay - 2 lbs
- Carrot Extract - 1 oz
- Turmeric Powder - 3 oz
- Orange 10X Essential Oil - 1.5 oz
EQUIPMENT:
- DISCONTINUED - Waterproof Labels - 1 label
- Droppers With Suction Bulb - 1 dropper
- Short 8 oz Plastic Bail Jar - 10 jars
Instructions
You will need:
- 4 Short 8 oz. Bail Jars
- 21.4 oz. Distilled Water
- 2.3 oz. Avocado Oil
- 1 oz. Polawax Emulsifying Wax
- 0.8 oz. BTMS-50 Conditioning Emsulifier
- 6 oz. Kaolin Clay
- 0.2 oz. Turmeric Powder
- 2 mL Carrot Seed Essential Oil
- 0.5 oz. Carrot Extract
- 0.2 oz. Optiphen
- Dropper
EQUIPMENT PREP: Disinfect your utensils by dipping them in a 5% bleach water solution and allowing to dry. This includes mixing containers, your stick blender, and any spoons or spatulas that may come in contact with your mask. Your products must be as free of germs, bacteria, and microbes as possible. To be safe, bleach water all your utensils.
CLAY PREP: In a small separate container, measure 6 ounces of kaolin clay.
Follow these steps:
1
In a heat-safe container, combine 2.3 ounces of avocado oil, 0.8 ounces of BTMS-50, and 1 ounce of Polawax. Heat the container in the microwave using 30-60 second bursts until the waxes have fully melted. Be careful when removing the container, as it will be quite hot. Set aside.
2
In a separate large container, heat 21.4 ounces of distilled water in the microwave (or on the stove top) until it reaches about 160-170° F. If necessary, remeasure and add more distilled water to account for any evaporation.
3
Check the temperatures of both containers. They should be about 160° F. If the oil and wax has cooled, place back into the microwave for 30 second bursts. Place the stick blender into the water and burp it to help get rid of bubbles. Pour the oil and wax mixture into the water and use a spatula to make sure every little bit is added. Begin pulsing the stick blender. The mixture will take on a milky appearance once the water, oil, and waxes have begun to emulsify. Continue to pulse and stir for about a minute.
4
Begin adding heaping spoonfuls of the kaolin clay and pulsing the stick blender until combined.
5
Continue stick blending for about 1-2 minutes. Use a spatula to scrape down any clay that may be on the sides of the bowl. Check the temperature of the mixture. When it's 130-140°F, add 0.2 ounces of Optiphen, 2 mL of carrot seed essential oil, and 0.5 ounces of carrot extract. Stick blend the ingredients together.
6
Add 0.2 ounces of turmeric powder and stick blend until completely mixed in. Continue to stick blend for several more minutes, just to make sure the ingredients are fully emulsified.
7
Pour the mixture into the bail jars. If you find you have a lot of bubbles on the top, you can spritz the top of the containers with alcohol to help get rid of some of them. Allow the containers to cool for several hours with the lid open to avoid condensation.
8
Once fully cooled, the mixture will have become a thick, lotion-like texture. To use, apply a medium layer to dry, clean skin. Avoid the immediate eye area. Allow the mask to sit on the skin for about 10-15 minutes. Use warm water to rinse off. There is no need to wash the skin after, but you can if you prefer.
Tutorial credits
Photographer: Amanda Kerzman
Turmeric Clay Face Mask Project
- LEVEL Intermediate
- TIME 30 minutes
- YIELD Four 8 oz. Jars
Project Description
Turmeric is a plant of the ginger family, and it's usually used in dry powder form. Its commonly added to dishes like curry and has been used in Chinese medicine for years. This Turmeric Clay Face Mask recipe harnesses the properties of this powerful spice, along with luxurious skincare ingredients like carrot seed essential oil and carrot extract.
This clay mask was specifically designed for normal to oily skin. It contains kaolin clay, which is fine-grained and gentle on the skin. Carrot extract is high in vitamins A and E, and it's thought to soothe the skin. Carrot seed essential oil is rich in vitamins and carotene. It has a distinct herby smell that’s not everybody’s favorite, but this recipe uses a small amount so it’s not overwhelming.
This mask washes off cleanly with no staining. Turmeric powder can stain your work surface though, so we recommend laying down newspaper or cardboard before you get started on this mask.
Want more skincare making supplies? Check out our skincare kits.
You will need:
- 4 Short 8 oz. Bail Jars
- 21.4 oz. Distilled Water
- 2.3 oz. Avocado Oil
- 1 oz. Polawax Emulsifying Wax
- 0.8 oz. BTMS-50 Conditioning Emsulifier
- 6 oz. Kaolin Clay
- 0.2 oz. Turmeric Powder
- 2 mL Carrot Seed Essential Oil
- 0.5 oz. Carrot Extract
- 0.2 oz. Optiphen
- Dropper
EQUIPMENT PREP: Disinfect your utensils by dipping them in a 5% bleach water solution and allowing to dry. This includes mixing containers, your stick blender, and any spoons or spatulas that may come in contact with your mask. Your products must be as free of germs, bacteria, and microbes as possible. To be safe, bleach water all your utensils.
CLAY PREP: In a small separate container, measure 6 ounces of kaolin clay.
Follow these steps:
1
In a heat-safe container, combine 2.3 ounces of avocado oil, 0.8 ounces of BTMS-50, and 1 ounce of Polawax. Heat the container in the microwave using 30-60 second bursts until the waxes have fully melted. Be careful when removing the container, as it will be quite hot. Set aside.
2
In a separate large container, heat 21.4 ounces of distilled water in the microwave (or on the stove top) until it reaches about 160-170° F. If necessary, remeasure and add more distilled water to account for any evaporation.
3
Check the temperatures of both containers. They should be about 160° F. If the oil and wax has cooled, place back into the microwave for 30 second bursts. Place the stick blender into the water and burp it to help get rid of bubbles. Pour the oil and wax mixture into the water and use a spatula to make sure every little bit is added. Begin pulsing the stick blender. The mixture will take on a milky appearance once the water, oil, and waxes have begun to emulsify. Continue to pulse and stir for about a minute.
4
Begin adding heaping spoonfuls of the kaolin clay and pulsing the stick blender until combined.
5
Continue stick blending for about 1-2 minutes. Use a spatula to scrape down any clay that may be on the sides of the bowl. Check the temperature of the mixture. When it's 130-140°F, add 0.2 ounces of Optiphen, 2 mL of carrot seed essential oil, and 0.5 ounces of carrot extract. Stick blend the ingredients together.
6
Add 0.2 ounces of turmeric powder and stick blend until completely mixed in. Continue to stick blend for several more minutes, just to make sure the ingredients are fully emulsified.
7
Pour the mixture into the bail jars. If you find you have a lot of bubbles on the top, you can spritz the top of the containers with alcohol to help get rid of some of them. Allow the containers to cool for several hours with the lid open to avoid condensation.
8
Once fully cooled, the mixture will have become a thick, lotion-like texture. To use, apply a medium layer to dry, clean skin. Avoid the immediate eye area. Allow the mask to sit on the skin for about 10-15 minutes. Use warm water to rinse off. There is no need to wash the skin after, but you can if you prefer.
Tutorial credits
Photographer: Amanda Kerzman