Lump of Coal Soap Project image number null
Lump of Coal Soap Project image number null

Lump of Coal Soap Project

Item No. PS000109
undefined out of 5 Customer Rating
LEVEL Beginner
TIME 1 hour
YIELD 3 pounds of soap
COST
$22.56
These Lump of Coal Soaps are a fun spin on holiday gifts. Your friends and family will actually want these in their stockings.

These bars are created with rebatch soap base. Rebatching refers to melting grated cold process soap over low heat. The soap can then be customized with color and fragrance. The Luxury Rebatch used in this project contains a skin-loving blend of oils and butters such as shea butter and olive oil. It’s made fresh so it’s easy to melt down.

Rebatch soap can be melted using a few different heating methods. You can also use a Crock-Pot or a double boiler. For this project we used a Presto Pot, which is similar to a fondue pot. The key is low, consistent heat.

Once the soap is melted, activated charcoal is added to give a coal-like appearance. Then Sandalwood Vanilla Fragrance Oil is mixed in for a sultry and delicious scent. The soap is allowed to cool slightly and formed into balls using your hands. Finally, a touch of Snowflake Sparkle Mica and a bit more activated charcoal are sprinkled on top. Because of the large amount of charcoal, these bars do lather gray.

What You Need:

IB002023
Activated Charcoal

Activated Charcoal - 1 oz

1 oz
$3.99
IB000647
Sandalwood Vanilla Fragrance Oil

Sandalwood Vanilla Fragrance Oil - 2 oz

2 oz
$7.59
IB002179
Snowflake UltraSparkle Mica

Snowflake UltraSparkle Mica - 1 oz

1 oz
$3.99
M900169
Rebatch Soap Base - Luxury

Rebatch Soap Base - Luxury - 1 lb

1 lb
$6.99
$22.56
4 products 0 tools

Recipe

INGREDIENTS:
  • Activated Charcoal - 1 oz
  • Sandalwood Vanilla Fragrance Oil - 2 oz
  • Snowflake UltraSparkle Mica - 1 oz
  • Rebatch Soap Base - Luxury - 1 lb
EQUIPMENT:

Instructions

You will need:

  • 48 oz. Grated Luxury Rebatch Soap
  • 3-4 oz. Distilled Water
  • 2 Tbsp. Activated Charcoal
  • 1.2 oz. Sandalwood Vanilla Fragrance Oil
  • Snowflake Sparkle Mica

Follow these steps:

1

Place 48 ounces of Luxury Rebatch Soap into your Crock-Pot, double boiler, or fondue pot. If using a Crock-Pot or fondue pot, turn the temperature on low and add about 1 ounce of water. Allow the soap to heat for a few minutes to gauge the temperature. If you see the soap starting to melt slightly, you can increase the temperature to low-medium and stir frequently.

2

As the soap cooks, add small splashes of water to help it melt down smoothly. Continue stirring frequently so the soap at the bottom of the pot doesn’t burn.

After a few minutes, the soap will look like very thick mashed potatoes, as shown below. Continue cooking slightly past this point to melt down any pieces of soap still present. Add a bit more water if necessary.

3

Once the soap is smooth, add 1.2 ounces of Sandalwood Vanilla Fragrance Oil and thoroughly mix in for several minutes.

4

Add activated charcoal 1 teaspoon at a time until you reach 2 tablespoons. Stir thoroughly between each addition.

5

Once all the charcoal is added, the soap will have a gray color. If it’s still very thick, add small amounts of water to achieve a smoother consistency. We don’t recommend adding more than 4 ounces of water. If you still see large chunks of rebatch, let the soap continue to cook for several minutes. Turn up the heat if necessary, just be careful to not let the soap burn!

6

Lay down several pieces of wax or parchment paper down on your work surface. Then spoon dollops of soap onto the paper. You can make them whatever size you like. Our soaps weighed about 2-3 ounces each.

7

As the dollops of soap sit, they will cool and harden. Once they are still soft but cool to touch, use your gloved hand to form them into the lump of coal shape you prefer. We made some of ours round, and some more oblong.

8

Sprinkle Snowflake Sparkle Mica and a touch of activated charcoal onto each soap. Use your hands to press the colors into the soap. There is really no right or wrong way to do it, and don’t worry about making them perfect. If the soap is still too warm and not holding its shape, allow it to cool for a few more minutes.

9

Allow the soap to fully cool and harden on the paper for a few hours. Once they are completely firm, transfer them to an area where they can cure for at least a week. Rebatch soap is ready to use once it’s cool, but we find letting it cure for at least a week allows any excess water to evaporate and creates a longer-lasting bar. Enjoy.
NOTE: These bars do lather gray due to the charcoal content. 

Tutorial credits

Photographer: Amanda Kerzman

See more

Lump of Coal Soap Project

  • LEVEL Beginner
  • TIME 1 hour
  • YIELD 3 pounds of soap

These bars are created with rebatch soap base. Rebatching refers to melting grated cold process soap over low heat. The soap can then be customized with color and fragrance. The Luxury Rebatch used in this project contains a skin-loving blend of oils and butters such as shea butter and olive oil. It’s made fresh so it’s easy to melt down.

Rebatch soap can be melted using a few different heating methods. You can also use a Crock-Pot or a double boiler. For this project we used a Presto Pot, which is similar to a fondue pot. The key is low, consistent heat.

Once the soap is melted, activated charcoal is added to give a coal-like appearance. Then Sandalwood Vanilla Fragrance Oil is mixed in for a sultry and delicious scent. The soap is allowed to cool slightly and formed into balls using your hands. Finally, a touch of Snowflake Sparkle Mica and a bit more activated charcoal are sprinkled on top. Because of the large amount of charcoal, these bars do lather gray.

You will need:

  • 48 oz. Grated Luxury Rebatch Soap
  • 3-4 oz. Distilled Water
  • 2 Tbsp. Activated Charcoal
  • 1.2 oz. Sandalwood Vanilla Fragrance Oil
  • Snowflake Sparkle Mica

Follow these steps:

1

Place 48 ounces of Luxury Rebatch Soap into your Crock-Pot, double boiler, or fondue pot. If using a Crock-Pot or fondue pot, turn the temperature on low and add about 1 ounce of water. Allow the soap to heat for a few minutes to gauge the temperature. If you see the soap starting to melt slightly, you can increase the temperature to low-medium and stir frequently.

2

As the soap cooks, add small splashes of water to help it melt down smoothly. Continue stirring frequently so the soap at the bottom of the pot doesn’t burn.

After a few minutes, the soap will look like very thick mashed potatoes, as shown below. Continue cooking slightly past this point to melt down any pieces of soap still present. Add a bit more water if necessary.

3

Once the soap is smooth, add 1.2 ounces of Sandalwood Vanilla Fragrance Oil and thoroughly mix in for several minutes.

4

Add activated charcoal 1 teaspoon at a time until you reach 2 tablespoons. Stir thoroughly between each addition.

5

Once all the charcoal is added, the soap will have a gray color. If it’s still very thick, add small amounts of water to achieve a smoother consistency. We don’t recommend adding more than 4 ounces of water. If you still see large chunks of rebatch, let the soap continue to cook for several minutes. Turn up the heat if necessary, just be careful to not let the soap burn!

6

Lay down several pieces of wax or parchment paper down on your work surface. Then spoon dollops of soap onto the paper. You can make them whatever size you like. Our soaps weighed about 2-3 ounces each.

7

As the dollops of soap sit, they will cool and harden. Once they are still soft but cool to touch, use your gloved hand to form them into the lump of coal shape you prefer. We made some of ours round, and some more oblong.

8

Sprinkle Snowflake Sparkle Mica and a touch of activated charcoal onto each soap. Use your hands to press the colors into the soap. There is really no right or wrong way to do it, and don’t worry about making them perfect. If the soap is still too warm and not holding its shape, allow it to cool for a few more minutes.

9

Allow the soap to fully cool and harden on the paper for a few hours. Once they are completely firm, transfer them to an area where they can cure for at least a week. Rebatch soap is ready to use once it’s cool, but we find letting it cure for at least a week allows any excess water to evaporate and creates a longer-lasting bar. Enjoy.
NOTE: These bars do lather gray due to the charcoal content. 

Tutorial credits

Photographer: Amanda Kerzman