Gentle Oatmeal Soap Project
These bars are easy to make and they feel great on the skin. They're made with oatmeal melt and pour base, which contains oat extract and finely-ground oats.
Golden oats fragrance oil gives the bars a warm and comforting scent with notes of honey and vanilla. Oats are placed on top for a rustic look and gentle exfoliation.
Try our 2 cavity silicone mold with this project and save!
What You Need:
SFIC Oatmeal Melt and Pour Soap Base - 1 lb
Golden Oats Fragrance Oil - 2 oz
Vanilla Color Stabilizer - 4 oz
6 Cavity Silicone Square Mold - 1 Mold
Recipe
INGREDIENTS:
- SFIC Oatmeal Melt and Pour Soap Base - 1 lb
- Golden Oats Fragrance Oil - 2 oz
- Vanilla Color Stabilizer - 4 oz
EQUIPMENT:
- 6 Cavity Silicone Square Mold - 1 Mold
Instructions
You will need:
- 6 Cavity Square Silicone Mold<
- 16 oz. Oatmeal Melt and Pour Soap Base<
- 0.3 oz. Golden Oats Fragrance Oil<
- 0.3 oz. Vanilla Color Stabilizer<
- Oats<
- 99% Isopropyl Alcohol in Spray Bottle
Follow these steps:
1
Chop 16 ounces of Oatmeal Melt and Pour Soap Base into small, uniform cubes. Place them in a heat-safe container and melt in the microwave using 30 second bursts.
2
Add 0.3 ounces of Golden Oats Fragrance Oil and 0.3 ounces of Vanilla Color Stabilizer to prevent discoloration. Mix completely.
3
Pour the soap into each cavity of the mold until they're about 90% full. Save a small amount to top off each cavity. Allow the soap in the mold to cool and harden slightly - about 5-10 minutes. It needs to develop a slight skin to support the oats on top.
4
Reheat the remaining soap using 3-5 second bursts. Sprinkle a small amount of oats on top of each cavity, spritz with 99% isopropyl alcohol, and pour the remaining melted soap into each cavity. After each pour, spray with 99% isopropyl alcohol to get rid of bubbles. Sprinkle on more oats if you like.
5
Allow the soap to fully cool and harden for about 3-4 hours. Remove from the mold and enjoy!
Tutorial credits
Photographer: Amanda Kerzman
Gentle Oatmeal Soap Project
- LEVEL Beginner
- TIME 30 minutes
- YIELD 6 bars of soap
Project Description
These bars are easy to make and they feel great on the skin. They're made with oatmeal melt and pour base, which contains oat extract and finely-ground oats.
Golden oats fragrance oil gives the bars a warm and comforting scent with notes of honey and vanilla. Oats are placed on top for a rustic look and gentle exfoliation.
Try our 2 cavity silicone mold with this project and save!
You will need:
- 6 Cavity Square Silicone Mold<
- 16 oz. Oatmeal Melt and Pour Soap Base<
- 0.3 oz. Golden Oats Fragrance Oil<
- 0.3 oz. Vanilla Color Stabilizer<
- Oats<
- 99% Isopropyl Alcohol in Spray Bottle
Follow these steps:
1
Chop 16 ounces of Oatmeal Melt and Pour Soap Base into small, uniform cubes. Place them in a heat-safe container and melt in the microwave using 30 second bursts.
2
Add 0.3 ounces of Golden Oats Fragrance Oil and 0.3 ounces of Vanilla Color Stabilizer to prevent discoloration. Mix completely.
3
Pour the soap into each cavity of the mold until they're about 90% full. Save a small amount to top off each cavity. Allow the soap in the mold to cool and harden slightly - about 5-10 minutes. It needs to develop a slight skin to support the oats on top.
4
Reheat the remaining soap using 3-5 second bursts. Sprinkle a small amount of oats on top of each cavity, spritz with 99% isopropyl alcohol, and pour the remaining melted soap into each cavity. After each pour, spray with 99% isopropyl alcohol to get rid of bubbles. Sprinkle on more oats if you like.
5
Allow the soap to fully cool and harden for about 3-4 hours. Remove from the mold and enjoy!
Tutorial credits
Photographer: Amanda Kerzman