Slowly and carefully add 3.7 ounces of lye to 8.3 ounces of distilled water and gently stir until the lye has fully dissolved and the liquid is clear. Set aside to cool. Optional: Add 1.5 teaspoons of sodium lactate to help the bars harden more quickly.

Fully melt the Lots of Lather Quick Mix until it's clear. Give the bag a good shake and measure 26 ounces into a large heat-safe container. Once the lye water and the oils have cooled to 130° F or below (and are ideally within 10 degrees of each other), add the lye water to the oils and stick blend until thin trace. 

Add the fragrance oil and 1 teaspoon of dispersed titanium dioxide. Whisk to fully combine.

Split 300 mL of soap into a separate container. This will remain white. In the main container, add 1 tablespoon of dispersed Sunset Orange Mica and whisk to combine.

If necessary, stick blend both containers until they're at a medium trace. Pour the white soap in various spots in the orange soap. Pour steadily from a high point to get the color all the way to the bottom. Run a spatula through a few times to swirl the color.

Set the Silicone Column Mold against a wall where you plan to let it harden. You don't want to move it after you pour the soap, otherwise it can come apart. Carefully pour the soap into the mold and spritz the top with alcohol to prevent soda ash. Let it harden for 1-2 days.

Unmold by pulling the 2 halves apart. Clean off any excess soap if necessary, and set aside. 

Slowly and carefully add 2.3 ounces of lye to 5.1 ounces of distilled water and gently stir until the lye has fully dissolved and the liquid is clear. Set aside to cool. Optional: Add 1 teaspoon of sodium lactate to help the bars harden more quickly.

Fully melt the Lots of Lather Quick Mix until it's clear. Give the bag a good shake and measure 16 ounces into a medium heat-safe container. Once the lye water and the oils have cooled to 130° F or below (and are ideally within 10 degrees of each other), add the lye water to the oils and stick blend until thin trace. 

Add the fragrance oil and whisk to fully combine. Split about 300 mL into a separate container and set aside. This will be used for the green leaves on top.

Add 1 tablespoon of titanium dioxide to the remaining soap. Pulse a few times with the stick blender to combine.

Add 1 teaspoon of poppy seeds and whisk to combine.

Pour a thin layer of white soap into the mold. Tap the mold firmly on the counter to disperse any bubbles.

Place the embed into the mold slightly off-center. Pour in the remaining white soap. You may need to use a spoon to smooth it out and fill in any gaps. Tap the mold on the counter to get rid of bubbles.

Add 1/2 teaspoon of dispersed Green Chrome Oxide to the remaining soap and whisk to combine. Wait until it's at a medium to thick trace - it needs to have a consistency similar to pudding to hold its shape. 

Cut both sides of the piping bag point diagonally to form a triangle in the center. Spoon the green soap in and pipe leaves down the length of the mold on the opposite side of the embed. Sprinkle poppy seeds on top.

Spritz the soap with 99% isopropyl alcohol to help prevent soda ash. Allow the soap to stay in the mold for 2-3 days. Unmold and cut into bars. Allow the bars to cure for 4-6 weeks. Enjoy!