Rose Quartz Soap Project
These bars feature a soft pink hue with swirls of white to emulate rose quartz stones. They're scented with Rose Quartz Fragrance Oil, which is a fresh and citrusy spin on a rose scent.
The soaps couldn’t be easier to make. After mixing in color and fragrance oil, the white and pink soap are poured together into the mold and swirled together. Get tips on how to swirl melt and pour soap here. Once the soap has fully cooled, use a non-serrated knife to cut the soap into gem shapes. The leftover soap can be used in future projects, like the Alpine Frost Crystal Soap.
What You Need:
Recipe
INGREDIENTS:
- SFIC Clear Melt And Pour Soap Base - 1 lb
- Rose Gold Mica - 1 oz
- Rose Quartz Fragrance Oil - 1.75 oz
- SFIC White Melt And Pour Soap Base - 1 lb
EQUIPMENT:
- 12 Bar Rectangle Silicone Mold - 1 Mold
- Droppers With Suction Bulb - 1 dropper
- 99% Isopropyl Alcohol - 1 bottle (16 oz by volume)
- 8 oz Clear Bottle with White Spray Cap - 10
Instructions
You will need:
- 12 Cavity Rectangle Silicone Mold
- 16 oz. Clear Melt & Pour Soap Base
- 16 oz. White Melt & Pour Soap Base
- 1 tsp. Rose Gold Mica
- 10 mL Rose Quartz Fragrance Oil
- Dropper
- 99% Isopropyl Alcohol in Spray Bottle
Follow these steps:
1
Chop 16 ounces of White Melt and Pour Soap and 16 ounces of Clear Melt and Pour Soap into small uniform pieces. Place them into separate heat-safe containers and melt in the microwave using 30 second bursts.
2
Once the bases are completely melted, disperse 1 teaspoon Rose Gold Mica into 1 tablespoon 99% isopropyl alcohol. Mix to get rid of any chunks of mica. Add all the dispersed mica into the melted clear soap.
3
Add 5 mL of Rose Quartz Fragrance Oil into the melted clear soap, and 5 mL into the melted white soap. Stir in completely.
4
Check the temperature of the soap. Both bases should be about 125-130° F to create wispy swirls. Fill about half of the mold with white soap. Then, pour the pink soap into the white soap until the cavity is full. You can alternate pouring the colors, or pour them at the same time. Use a chopstick, dowel, or small spoon to swirl the soap. Spritz with 99% isopropyl alcohol to get rid of any bubbles on top.
5
Repeat this process until all the soap is poured. Allow the soap to fully cool and harden for several hours or up to overnight. Remove them from the mold.
6
Use a sharp non-serrated knife to cut the soaps into gem shapes. There is no right or wrong way to do it – just have fun with it.
7
Wrap the bars in plastic wrap to help prevent glycerin dew. Enjoy!
Tutorial credits
Photographer: Amanda Kerzman, Christina Becker
Rose Quartz Soap Project
- LEVEL Beginner
- TIME 30 minutes
- YIELD 2 pounds of soap
Project Description
These bars feature a soft pink hue with swirls of white to emulate rose quartz stones. They're scented with Rose Quartz Fragrance Oil, which is a fresh and citrusy spin on a rose scent.
The soaps couldn’t be easier to make. After mixing in color and fragrance oil, the white and pink soap are poured together into the mold and swirled together. Get tips on how to swirl melt and pour soap here. Once the soap has fully cooled, use a non-serrated knife to cut the soap into gem shapes. The leftover soap can be used in future projects, like the Alpine Frost Crystal Soap.
You will need:
- 12 Cavity Rectangle Silicone Mold
- 16 oz. Clear Melt & Pour Soap Base
- 16 oz. White Melt & Pour Soap Base
- 1 tsp. Rose Gold Mica
- 10 mL Rose Quartz Fragrance Oil
- Dropper
- 99% Isopropyl Alcohol in Spray Bottle
Follow these steps:
1
Chop 16 ounces of White Melt and Pour Soap and 16 ounces of Clear Melt and Pour Soap into small uniform pieces. Place them into separate heat-safe containers and melt in the microwave using 30 second bursts.
2
Once the bases are completely melted, disperse 1 teaspoon Rose Gold Mica into 1 tablespoon 99% isopropyl alcohol. Mix to get rid of any chunks of mica. Add all the dispersed mica into the melted clear soap.
3
Add 5 mL of Rose Quartz Fragrance Oil into the melted clear soap, and 5 mL into the melted white soap. Stir in completely.
4
Check the temperature of the soap. Both bases should be about 125-130° F to create wispy swirls. Fill about half of the mold with white soap. Then, pour the pink soap into the white soap until the cavity is full. You can alternate pouring the colors, or pour them at the same time. Use a chopstick, dowel, or small spoon to swirl the soap. Spritz with 99% isopropyl alcohol to get rid of any bubbles on top.
5
Repeat this process until all the soap is poured. Allow the soap to fully cool and harden for several hours or up to overnight. Remove them from the mold.
6
Use a sharp non-serrated knife to cut the soaps into gem shapes. There is no right or wrong way to do it – just have fun with it.
7
Wrap the bars in plastic wrap to help prevent glycerin dew. Enjoy!
Tutorial credits
Photographer: Amanda Kerzman, Christina Becker